Actions

AudioBox

From trivum

AudioBox silver.png

Introduction

Features

  • Streaming from NAS
  • Streaming via AirPlay
  • Streaming from internet streaming services
  • Streaming from internet radio stations
  • 4x Preset buttons

Specification

width 150 mm
depth 150 mm
height 40 mm
inputs 1x RJ-45 ethernet
1x FM antenna
1x Line-In (stereo)
1x Optical-In (SPDIF)
outputs 1x Line-Out (stereo)
audio out 1x stereo speaker
built-in amplifier 2x 25 W (4 Ω)
voltage 20 V DC
current 4.5 A

Updating the AudioBox Software

  1. Open the Multiroom Setup Tool
  2. Click SystemShow a TouchVisu
    → The TouchVisu opens
  3. Click the trivum icon (upper right corner) to open the System Menu
    5.png
  4. Click SetupChange to system setup
    6.png
  5. Click System SetupSoftwareupdate
    8.png
  6. In the row Action, manually enter
    yes


Tip: If you use AudioActuator (4x) and/or AudioBox in a master/slave configuration, you must only update the master.

→ All slaves will download the new software version automatically.

Features

Connections

IR

AudioBox supported IR codes:

The protocol used is RC5.
The AudioBox listens on device address 7.
The following command codes are supported:

Code Command
12 ZONECMD_POWER_OFF
38 Switch on, use ZONECMD_PRESET_1 (same as first hardware key)
18 ZONECMD_VOLUME_DEC
20 ZONECMD_VOLUME_INC
17 MULTIKEY_BASIC_BACKWARD
16 MULTIKEY_BASIC_FORWARD

Troubleshootings

A list of all Troubleshootings concerning the AudioBox you can find here.

Resources

  • Datasheet (de|en)
  • Product picture (zip)

Support